CPU V-CorePost Date: 2011-09-02 |
Post Reply
|
Page <12 |
| Author | |
RiceEatin2000GT
DS Veteran
Joined: 02 Oct 2008 Online Status: Offline Posts: 1699 |
Quote Reply
Posted: 02 Sep 2011 at 4:16am |
its my pleasure, i know how it feels to have something not quite right with a computer so i try and help out as much as i can. As always if you need more help just post away. |
|
|
|
![]() |
|
Cerebros
Newbie
Joined: 09 Aug 2011 Online Status: Offline Posts: 26 |
Quote Reply
Posted: 02 Sep 2011 at 4:30am |
|
So I am finally staying within 1.33 and 1.34 under load. So how much voltage would you recommend going up by after each test?
|
|
![]() |
|
RiceEatin2000GT
DS Veteran
Joined: 02 Oct 2008 Online Status: Offline Posts: 1699 |
Quote Reply
Posted: 02 Sep 2011 at 12:37pm |
this is the settings your seeing like 1.37 or so when its not 100% full load in offset? If you've passed 20 runs of linx and are happy with the clock speed there is no reason to add more voltage. If anything you would want to keep removing voltage to find the lowest possible v-core you can run at without bsod'ing. Honestly if your happy i wouldn't keep removing voltage those settings are more than fine. edit- unless you wanted to try the 4.7 ghz overclock then just put in the voltages and make the changes we discussed earlier in the thread(offset or manual) Edited by RiceEatin2000GT - 02 Sep 2011 at 12:58pm |
|
|
|
![]() |
|
Cerebros
Newbie
Joined: 09 Aug 2011 Online Status: Offline Posts: 26 |
Quote Reply
Posted: 02 Sep 2011 at 4:09pm |
|
Well I ended up going manual like you put up I didn't like the jumps that offset had. I started at 1.35 voltage for 4.5. I tried to get my voltage as close to 1.39 which meant turning up my voltage to 1.390 I think is what it is at now. I crashed at 1.395 so I put it back to 1.390. Is that to high of voltage for where it is set now?
I also tried to do a 4.7 GHz on a separate profile but it BSOD at 1.375 after about 2 minutes of LinX so I have gone back to trying to tweak the 4.5 GHz profile. Right now my idle runs 1.384 - 1.392 and under load it downclocks to 1.36-1.37. I haven't been able to get my load Vcore any higher due to voltage being to high at idle. I am going to be running a 20 pass test on the 1.390 voltage I have now and see if it crashes at all I just ran out of time last night. Edited by Cerebros - 02 Sep 2011 at 4:13pm |
|
![]() |
|
Cerebros
Newbie
Joined: 09 Aug 2011 Online Status: Offline Posts: 26 |
Quote Reply
Posted: 02 Sep 2011 at 5:16pm |
|
So my system locked up after running Linx for a half hour at 1.390. What is weird is my voltage is highlighted in red until I drop the voltage down to 1.270 which it is now yellow. Is there something else in bios I should have on or off that is making it so I can't have much voltage?
|
|
![]() |
|
RiceEatin2000GT
DS Veteran
Joined: 02 Oct 2008 Online Status: Offline Posts: 1699 |
Quote Reply
Posted: 02 Sep 2011 at 5:58pm |
|
it locked at 1.39 at what multi and offset or manaul?(i think i know) Make sure your changing the load line to very high if your in manual and regular in offset. Also some chips have a wall they cant pass and its very hard to get them stable. I would try this manual voltage of 1.375 in manual mode load line of very high and a multiplier of 45.(bases on your last post you already have it at 1.39, i think) As far as typing in the value just type it in and hit enter it should work fine. Edited by RiceEatin2000GT - 02 Sep 2011 at 6:08pm |
|
|
|
![]() |
|
RiceEatin2000GT
DS Veteran
Joined: 02 Oct 2008 Online Status: Offline Posts: 1699 |
Quote Reply
Posted: 02 Sep 2011 at 7:13pm |
its worth a check, what are your values set to below dram voltage, they all should be auto. if all these are on auto(beside ram voltage) If in fact you were at 1.39 at 4.5ghz and load line was set on very high i would start dialing back your multi until you find something thats stable. 44 the 43 etc. You also could try 4.5 at 1.4 v core but thats the highest i would go. |
|
|
|
![]() |
|
Cerebros
Newbie
Joined: 09 Aug 2011 Online Status: Offline Posts: 26 |
Quote Reply
Posted: 02 Sep 2011 at 7:18pm |
|
I had it set at 1.39 manual at 45 and it locked up at the half hour mark. The load line is set to ultra high which is what I guess is very high. I wonder about the highlighted voltage though in red when I set it higher then 1.27. It is purple until 1.29 and then it highlights in red so it makes me think it is acting like I am setting it to high and just crashes.
I have set my voltage to 1.375 in manual at 45 we will see how it turns out. But even so as I am in my 6th pass my voltages read minimum of 1.35 and max of 1.37 |
|
![]() |
|
RiceEatin2000GT
DS Veteran
Joined: 02 Oct 2008 Online Status: Offline Posts: 1699 |
Quote Reply
Posted: 02 Sep 2011 at 7:27pm |
|
thats perfect if you can be stable at 4.5ghz at 1.375 i would leave it and be happy =)
|
|
|
|
![]() |
|
Cerebros
Newbie
Joined: 09 Aug 2011 Online Status: Offline Posts: 26 |
Quote Reply
Posted: 02 Sep 2011 at 7:34pm |
|
I'll check on the bios options you posted as soon as these 20 passes finish. One thing though why would it be highlighting my voltage in red. I would have thought red = bad because when DS sent me my system they had it set for a 4.7 oc at 1.45 manual I want to say and it wasn't red before I switched it too offset the first time talking to the tech.
|
|
![]() |
|
RiceEatin2000GT
DS Veteran
Joined: 02 Oct 2008 Online Status: Offline Posts: 1699 |
Quote Reply
Posted: 02 Sep 2011 at 7:35pm |
i wouldnt worry about it to be honest as long as its at the voltage you set even if the v-core box is red its still better then running at 1.45v. |
|
|
|
![]() |
|
Cerebros
Newbie
Joined: 09 Aug 2011 Online Status: Offline Posts: 26 |
Quote Reply
Posted: 02 Sep 2011 at 8:15pm |
|
So it just finished the 20 passes with no errors at the 1.375. The voltage went from 1.35-1.38 over the whole course of the test. Looks like it is pretty stable where it is but I am going to for sure check what you mention a few posts ago.
|
|
![]() |
|
RiceEatin2000GT
DS Veteran
Joined: 02 Oct 2008 Online Status: Offline Posts: 1699 |
Quote Reply
Posted: 02 Sep 2011 at 8:18pm |
very good, best part is your never ever going to put this much stress on the cpu gaming so if it can take 20 passes of linx and be stable the odds of you having issues are super low. |
|
|
|
![]() |
|
Cerebros
Newbie
Joined: 09 Aug 2011 Online Status: Offline Posts: 26 |
Quote Reply
Posted: 02 Sep 2011 at 8:44pm |
|
So I had to head out for a bit. I looked at my values three of them had values set not auto which were: Vccsa voltage, Vccio voltage, and CPU Pll voltage. I will double check on those when I get home but I think those had values set rest were on auto
|
|
![]() |
|
RiceEatin2000GT
DS Veteran
Joined: 02 Oct 2008 Online Status: Offline Posts: 1699 |
Quote Reply
Posted: 02 Sep 2011 at 10:09pm |
|
|
|
|
![]() |
|
Cerebros
Newbie
Joined: 09 Aug 2011 Online Status: Offline Posts: 26 |
Quote Reply
Posted: 03 Sep 2011 at 1:35am |
|
Alright so I just got home these are what my bios are set at:
Dram Voltage - 1.65000 VCCSA Voltage - 0.90000 VCCIO Voltage - 1.20000 Cpu PLL Voltage - 1.85000 The other ones are Auto with Cpu Spread Spectrum - Disabled I should be changing all of those to auto with the exception of Dram Voltage right? |
|
![]() |
|
RiceEatin2000GT
DS Veteran
Joined: 02 Oct 2008 Online Status: Offline Posts: 1699 |
Quote Reply
Posted: 03 Sep 2011 at 1:40am |
none of those voltages are crazy off but yea i would go to auto. |
|
|
|
![]() |
|
Cerebros
Newbie
Joined: 09 Aug 2011 Online Status: Offline Posts: 26 |
Quote Reply
Posted: 05 Sep 2011 at 12:40am |
|
Just wanted to give you a little update. I was able to get my Vcore stable at 1.38 which makes me idle about that sometimes goes up to 1.39 so I am happy with that. Under load I am doing pretty good too at 1.37-1.39 so I really appreciate your help over the weekend Rice.
|
|
![]() |
|
RiceEatin2000GT
DS Veteran
Joined: 02 Oct 2008 Online Status: Offline Posts: 1699 |
Quote Reply
Posted: 05 Sep 2011 at 12:45am |
glad your happy with the settings
|
|
|
|
![]() |
|
Post Reply
|
Page <12 |
| Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |