trouble shooting a motherboadPost Date: 2012-10-06 |
Post Reply
|
| Author | |
Rhodes
Newbie
Joined: 03 Jul 2009 Online Status: Offline Posts: 20 |
Quote Reply
Topic: trouble shooting a motherboadPosted: 06 Oct 2012 at 12:31pm |
|
On start up I heard a slight pop sound then the computer would not do anthing. There is no signal going to the monitor. There is power to the MB, the fans, LED lights, and the video card fan.
I'm pretty sure the MB died. Does anyone have a site for MB trouble shooting? I'd like to go through the list just to make sure the MB is bad before buying a new one. Thanks |
|
![]() |
|
bprat22
DS ELITE
DigitalStorm East -- (Unofficially!)
Joined: 08 Jun 2011 Online Status: Offline Posts: 20391 |
Quote Reply
Posted: 06 Oct 2012 at 12:52pm |
|
Hi Rhodes..... I'm not there but it sounds like video card. Have you tried another Pci slot?
Unplug mobo 24 pin and 8 pin connectors and check for burned pins or just not seated tight. Check power connector to video card for loose or burned pins Do you have an older video card to try? Or does mobo have integrated graphics you can try with card removed?. Hit Caps Lock or Num Lock on keyboard to see if the led lights. This will check mobo's usb as long as its a non-wireless keyboard, if no display. This also lets you know the pc posted ok if no display. Try different video card monitor port if it has one. Off hand I don't know of a good way to check a mobo for all that can go wrong. Usually takes a test bench or just trial and error. Just a few things to check and good luck. Also, psu could be bad. If you have fans, etc the 12v line is probably good. If you have a meter check at 24 pin connector, yellow.... 12v, red...5v, and orange...... 3.3 volt DC. Those are usually the colors but not sure inall cases Edited by bprat22 - 06 Oct 2012 at 1:13pm |
|
![]() |
|
Rhodes
Newbie
Joined: 03 Jul 2009 Online Status: Offline Posts: 20 |
Quote Reply
Posted: 07 Oct 2012 at 5:02pm |
|
The video card is good. I do not see any burnt pins. The lights for the caps lock are not working. There are no beeps or sounds to show the MB is booting.
|
|
![]() |
|
Steveski
Groupie
Joined: 04 Mar 2009 Online Status: Offline Posts: 104 |
Quote Reply
Posted: 08 Oct 2012 at 8:30am |
|
Might I suggest you aim better! Sorry, I could not resist.
|
|
![]() |
|
Rhodes
Newbie
Joined: 03 Jul 2009 Online Status: Offline Posts: 20 |
Quote Reply
Posted: 08 Oct 2012 at 1:28pm |
|
Other testing I did on the MB:
I tested the voltage to the video card, HD, CD drive, 8-pin power connector, and the 24-pin connector. All looks ok. I switched out the video card, still no signal. I pulled the memory strips one-by-one while turning on the computer. No signal. I cleared the Cmos. I checked the clock battery. Anyone have other ideas.
|
|
![]() |
|
bprat22
DS ELITE
DigitalStorm East -- (Unofficially!)
Joined: 08 Jun 2011 Online Status: Offline Posts: 20391 |
Quote Reply
Posted: 08 Oct 2012 at 2:02pm |
|
In general, when the input voltages to mobo are good and there are no outputs, like video card, usb to keyboard, etc then your first thought of bad mobo is probably right. Some mobos have led indicaters that hint at problems. Check the manual. If all is dead, no led, beeps , audio out, usb then it does indicate a mobo.
|
|
![]() |
|
Alex
Admin Group
Digital Storm Supervisor
Joined: 04 Jun 2012 Online Status: Offline Posts: 16314 |
Quote Reply
Posted: 08 Oct 2012 at 2:26pm |
|
It sounds like either a motherboard issue or power supply. If you have a power supply you can try, I would recommend giving it a shot before assuming it's the motherboard.
|
|
![]() |
|
Rhodes
Newbie
Joined: 03 Jul 2009 Online Status: Offline Posts: 20 |
Quote Reply
Posted: 09 Oct 2012 at 1:57pm |
|
Thanks all
|
|
![]() |
|
Post Reply
|
| Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |