And there was much rejoicing.. My computer is done

Hey everyone, I have finally started my worklog!!!

This will be edited on a regular basis and changed up because when I first wrote this, it's kind of all over the place.  Sorry about that.
I added a weekly work log to it so it makes more chronological sense.

Project 1:
Basically, I am turning my existing single loop Dual-SLi into a dual loop, Triple-SLi.

___________________PC HARDWARE___________________
I have:
CM Stacker 830
eVGA 680i soon to be a 780i
QX6800
2x8500C5D dominator ram
3x 8800GTX
Asus P1 PhysX
Soundblaster Fatal1ty
Silverstone ST1000NV PSU
__________________________________________________
Here is the system currently with a dual GTX and a single loop:

and my 3rd GTX with waterblock

With this waterblock it makes the GTX/Ultra a single slot card, therefore allowing usage of the 3GTX and 2 add'l cards. 

and the Triple Rad

_________________________________________________________

I got extra stacker 830s at work so I grabbed one and stripped it down. 
I am currently getting the interior of the case powder coated ($35!!!! at e-techcollision.com in walnut creek ca) and the exterior I am not sure what theme I am going for.  I will work on that later.
I already made my cuts (yes, they're not as good as some of the other cuts here, like made by GameGuru and Lowfat... (I made the fan cuts too wide, but nothing a little moulding and gaskets can't fix) made. 
I am putting the GTX 360 at the bottom, and 1x120 at the top and the other one at the back on the inside.  But, I am thinking that may not be condusive to airflow.  I may take the one from the top and put it in the front bay like how Croak in BC did back on the 1.1.08 post, (page 68 on the stacker slacker thread)

___________
Week 1:
Anyway, so my worklog starts with the dissasembly of the new chassis.  Then I went out and bought the jigsaw and dremel set and made my cuts.  Since I am blind in my left eye, I can't see straight lines (don't ask it's hard to explain)... so my cuts are a little wider than I hoped.

Then I took the chassis for Powder Coating a week ago.  I pick it up on this Wednesday.  :(
But after reading Leadanek's post, I may have to screw up the mobo tray's paintjob to make cuts like that... since I forgot to make those cuts when I dropped it off at the Powder Coaters...

I also picked up window moulding and gasket material.

My roomie is a mechanic and own's his own shop so he's helping me out a lot with Gasket materials, Window Moulding and stuff he has there.  Go me!

___________

Friday
I picked up a Silverstone ST1000NV PSU from work.

Week 2:
Monday:
Went to Petra's and Alex hooked me up with:
1 EK Supreme

and 2 Petra'sTech DDCT-01s Custom Acetal DDC Pump Top (w/Barbs!)

as well as 2 Rhoebus Sunbeam Fan controllers.

My only complaint is that these GPU blocks aren't single slot like my koolance blocks.  So now I have to sacrifice the sound card and physx card. :(
Tuesday:
Ordered EK Waterblocks for the GPUs and had them overnighted.
Took the swiftechs back to Petra's.  Spoke to Alex and Quoc a bit.  They agree that with maintenance, the Koolance blocks are actually pretty good.

Wednesday:
I picked up the chassis from the powder coaters today.  The gunmetal black looks AWESOME!!!!!!!   I will take pics when I put it together and make my final cuts...
I can't wait to start the external part of the chassis!!!!

Friday:
Ok, so I haven't had a chance to upload the pics of the parts that are powdercoated yet.

Something I was thinking about when I was looking at all the parts dissasembled is that I need to re-drill the back plate of the mobo tray in reference to Cpl Ledanek's post at http://www.xtremesystems.org/forums/showpost.php?p=2705149&postcount=1728

Sunday
Here are the painted panels!

I have to cut the mobo tray now... more pics coming once I am done!

I know... my cuts are crooked... but I am blind in my left eye and cannot see straight lines...

Thursday:
Got my CPU Lapping kit from ezpckits.com
Got my black rivets from Performance-PCs.com

___________
OK, so this is a month or so over due...  I apologize.  A lot of personal setbacks occured.  Anyway, it is finally finished.

So over the month I have aquired everything.  The final build is:
Modified Coolermaster Stacker 830
eVGA 780i
QX9650 @ 4.260 (1.5v, 10mx1704fsb, temps-33,36,36,43)
4gb 8500C5D  Corsair Dominators (2.1, 1066MHz)
3x8800GTX in SLi (flashed with the ACS3 bios, 656/2000/1500,  temps- 38,34,33)
Asus P1 PhysX
Soundblaster X-Fi Fatal1ty soundcard

Now what you're all waiting for.... PICS!!!!!

________________________
I plan on Lapping my QX9650 when I change all the tubing and clean everyhting in 3 months.
I am thinking of changing to the Cosmos S case then too.

________________________

Ok here's the pics I have for now.