FAQ FAQ  Forum Search   Register Register  Login Login

Determine if the issue is hardware or software

Post Date: 2009-07-09

 Post Reply Post Reply
Author
  Topic Search Topic Search  Topic Options Topic Options
Alex View Drop Down
Admin Group
Admin Group

Digital Storm Supervisor


Joined: 04 Jun 2012
Online Status: Offline
Posts: 16314
  Quote Alex Quote  Post ReplyReply bullet Topic: Determine if the issue is hardware or software
    Posted: 09 Jul 2009 at 1:16pm

Before we actually begin resolving the issue, it is essential to know if the problem is either caused by hardware or the software inside your system.

Hardware Issue(s): This could be a faulty memory stick, overclocking, video card, hard drive, etc... In order to tackle this, you can use diagnostic utilities to check for issues:
  1. Overclocking/Processor: Use Prime95 32-Bit (http://www.eocfiles.com/bdc86eb1ed2989c30dcd1902e84939ae/motherboard/utilties/p95v258.zip) or 64-Bit (http://www.eocfiles.com/bdc86eb1ed2989c30dcd1902e84939ae/motherboard/utilties/p64v258.zip) and select the "small FFTs" stress test. Allow this to run for 24-hours. You may also try using LinX (http://youwatched.com/datajay/linx.zip) and make sure you click the "All" button in order to maximize the memory it uses and set it to "100" for times to run.
  2. Memory: Try using LinX (http://youwatched.com/datajay/linx.zip) and make sure you click the "All" button in order to maximize the memory it uses and set it to "100" for times to run. You can also try using MemTest86+ (http://www.memtest.org/download/2.11/memtest86+-2.11.iso.zip) but you will need to burn the ISO image file to a CD using a CD burning application. The CD must be booted from the computer during start up as well. The test will alto begin and you verify your memory for at least 7 full passes.
  3. Video Card(s): Try using FurMark (http://www.ozone3d.net/benchmarks/fur/mirrors.php) and make sure you select the "Run Mode" to "Stability Test", make sure "Full Screen" is selected and you have selected your monitor's native resolution and hit "Go." Allow this test to run for 6 hours to verify if you have any heat/stability issues with the video cards. You may also try using 3D Mark Vantage or 3D Mark 2006 to verify if your video cards are the culprit.
  4. Hard Drive: Try Western Digitals Diagnostic Utilities (http://www.softpedia.com/get/System/Hard-Disk-Utils/Western-Digital-DLG-Diagnostics.shtml)
Software Issue(s): This could be the very application/game that you are using, drivers, utilities you have running, or the operating system itself.
  1. In this type of situation, it's best to try to pin-point which specific software piece is causing the problem. Once it is identified, check for updates/patches for fixes.
Back to Top
AndydViking View Drop Down
Senior Member
Senior Member


Joined: 10 Sep 2009
Online Status: Offline
Posts: 733
  Quote AndydViking Quote  Post ReplyReply bullet Posted: 25 Dec 2009 at 10:18pm
Alex,
 
When one runs furmark what kinds of things are they looking for to happen within that 6 hours if the GPU is faulty?  Artifacts on screen, crash, furmark will shut off or any one of those?


Edited by AndydViking - 25 Dec 2009 at 10:19pm
Back to Top
Alex View Drop Down
Admin Group
Admin Group

Digital Storm Supervisor


Joined: 04 Jun 2012
Online Status: Offline
Posts: 16314
  Quote Alex Quote  Post ReplyReply bullet Posted: 26 Dec 2009 at 1:15pm

Either your system will crash/hang/re-start/blue screen or your screen itself will be all distorted and you won't see a nice fury looking doghnut.

Back to Top
 Post Reply Post Reply

Forum Jump Forum Permissions View Drop Down



This page was generated in 2.148438E-02 seconds.