Expanding Stage 3 LC setupPost Date: 2011-06-21 |
Post Reply
|
| Author | |
sneaky George W
Groupie
Joined: 13 Jun 2011 Online Status: Offline Posts: 196 |
Quote Reply
Topic: Expanding Stage 3 LC setupPosted: 21 Jun 2011 at 8:28pm |
|
I am looking to expand my the liquid cooling set up in my DSO System. it currently has stage 3, (cpu cooling, 120mm radiator on rear exhaust) and id like to liquid cool the GPU's (SLI 570's). I realize that this is beyond cost efficiency, but i think it would be cool(pun intended). i was wondering what parts would be recommended and with what fan set ups. I am kinda in an awkward situation in that i have a HAF X case with 200mm fans (two on top). would a separate loop be best with another pump and reservoir? ive been looking at danger den radiators, water blocks, tubing ect, and swift tech pumps and reservoirs. Thanks!
|
|
![]() |
|
Alex
Admin Group
Digital Storm Supervisor
Joined: 04 Jun 2012 Online Status: Offline Posts: 16314 |
Quote Reply
Posted: 21 Jun 2011 at 10:46pm |
|
A good way to do is create a new separate loop for your video cards. You'll have to replace the 200mm fans with standard fans.
A good solution is to purchase a Swiftech cooling kit directly: http://www.swiftech.com/lc_kits.aspx |
|
![]() |
|
sneaky George W
Groupie
Joined: 13 Jun 2011 Online Status: Offline Posts: 196 |
Quote Reply
Posted: 22 Jun 2011 at 1:45am |
|
Thanks Alex, unfortunately Swiftech (as far as i could find) doesn't have a kit that would make much sense for me; they all are designed for cpu cooling primarily, and only one kit comes with one GPU block (http://www.swiftech.com/h2o-220ultimaxtplusliquidcoolingkit.aspx) would that block work for a gtx 570? i was looking at blocks from Danger Den, are they decent quality? and is a triple radiator whats recommended for cooling two GPU's?
|
|
![]() |
|
DST4ME
DS ELITE
Joined: 14 Apr 2008 Online Status: Offline Posts: 36758 |
Quote Reply
Posted: 22 Jun 2011 at 2:13am |
|
You find anybody recommend DD parts to you cause they are no good.
If you are looking for best parts and good temps. put a dual xspc rx series rad out side in the back of your case, kinda like how my triple is sitting in the back of my case. you can use this to do it: Radiator Mounting Bracket with Quick-Release put 2 Scythe gentle typhoon fans or if you like push/pull 4 Scythe gentle typhoon on that xspc rx dual rad. for waterblocks use xspc gpu water blocks or ek IMHO. as for what is recommend to two gpus, for best temps a dual rad for each gpu, that means 2 x dual rad total, but you can get away with a single dual rad, triple would be better, keep in mind a triple rad with no push/pull is better then dual rad with push/pull. You will find those parts much better performers then what you got on your cpu, or DD products. Edited by DST4ME - 22 Jun 2011 at 2:14am |
|
![]() |
|
Alex
Admin Group
Digital Storm Supervisor
Joined: 04 Jun 2012 Online Status: Offline Posts: 16314 |
Quote Reply
Posted: 22 Jun 2011 at 1:09pm |
|
XSPC makes some good stuff.
Edited by Alex - 22 Jun 2011 at 1:09pm |
|
![]() |
|
sneaky George W
Groupie
Joined: 13 Jun 2011 Online Status: Offline Posts: 196 |
Quote Reply
Posted: 24 Jun 2011 at 7:56pm |
|
Ok, thanks for the advise DST4ME and Alex. DST, are you saying that a dual rad with 4 fans in push/pull is less effective than a triple rad with no fans or a triple rad with only three fans? and how would a setup with two dual rad's for the GPU's work? would the loop go to both rads and then the GPU's or one rad then one GPU then the other rad and other GPU?
|
|
![]() |
|
DST4ME
DS ELITE
Joined: 14 Apr 2008 Online Status: Offline Posts: 36758 |
Quote Reply
Posted: 24 Jun 2011 at 8:35pm |
|
If rad model make is the same, then triple rad with 3 fans will beat dual rad with push/pull, in lC, all things staying the same, the rad size with correct fans will rule.
a dual rad for each gpu is what is recommended for the best temps but keep in mind its not necessary. if you have a dual rad for each gpu, then loop needs to go to gpu 1 to rad, to gpu 2 to rad, to go reservoir, and flow back to gpu 1. |
|
![]() |
|
sneaky George W
Groupie
Joined: 13 Jun 2011 Online Status: Offline Posts: 196 |
Quote Reply
Posted: 24 Jun 2011 at 9:44pm |
![]() |
|
DST4ME
DS ELITE
Joined: 14 Apr 2008 Online Status: Offline Posts: 36758 |
Quote Reply
Posted: 25 Jun 2011 at 11:39am |
|
for blocks you can also go with xspc or ek, does not really matter what they use in it, now in days you can't go wrong with either.
pump is not as important the laing ddc 3.2 or mcp355, DS uses one or the other, they are pretty much the same really, get a xspc pump head for them if you like, little better performance, but nothing huge. My pleasure
|
|
![]() |
|
sneaky George W
Groupie
Joined: 13 Jun 2011 Online Status: Offline Posts: 196 |
Quote Reply
Posted: 25 Jun 2011 at 12:50pm |
|
a few more questions... what is the difference (besides price) between compression fittings and barb fittings? and with the gentle typhoons, what speed is recommended? right now im thinking of going with a triple rad, as it looks like my case (HAF X) has an easy spot to mount one on top. does it make sense to put three gentle typhoons under it to push and reverse the two top 200mm fans to pull? (the rad would be sandwiched between). would this negativly affect the temps of my other components? i'd still have air coming in from the front of the case and the side (next to the GPU's). currantly all the fans are pulling in air except the one attached to my radiator at the back of the case (four 200mm fans, two on top, one next to gpu's and one in front bottom of case). with this new set up, should the loop go reservoir, pump GPU 1, GPU 2, Rad? should I have the two loops cross? ie: res 1, pump, rad 1, cpu, (that's currant set up i think) res 2, pump, gpu 1, gpu 2, triple rad, res 1?
|
|
![]() |
|
DST4ME
DS ELITE
Joined: 14 Apr 2008 Online Status: Offline Posts: 36758 |
Quote Reply
Posted: 25 Jun 2011 at 1:27pm |
|
OK lets see.
well first of all, your fan setup is wrong, front and side should be blowing in, 2 top sucking out, your airflow sucks right now in that case, and then all the heat is going thru the rad via exhuast fan on rad, heat rises so you use the 2 top fans to help it out. triple rad good = idea putting 3 typhoons under it to push air thru it and up = good idea, you should do push/pull but not with the 200mm fans, in push/pull you want to match the fans to match the airflow, for LC you don't need that much airflow anyways, so drop the 2 top fans, and do push/pull with rad on top, sucking air up and put. go with 1400rpm tyhpoons compression fittings and barb fittings, compression is tougher to get on, and cost more, but IMHO are worth it, bitspower has some good ones. dual loop, one loop for cpu, one for gpu. loop is res/pump/rad/block the gpu loop can be: res2>pump2>gpu1>gpu2>rad2 If you want a flashy res checkout some of bitspower's but make sure it has room in your case:
and this is kinda what it would have looked like if I went with it for my cpu loop:
but I don't have anymore room in this case. |
|
![]() |
|
sneaky George W
Groupie
Joined: 13 Jun 2011 Online Status: Offline Posts: 196 |
Quote Reply
Posted: 25 Jun 2011 at 1:51pm |
|
Thanks for all your help DST! I feel like im pestering you with questions, but LC is expencive and i dont want to waste my money... speaking of which do you have recommended websites to buy from? is FrozenCPU good?
whats the advantage of compression fittings over barbed? and if i get EK waterblocks am i limited to EK SLI Fittings? or could i use another brand? Thanks Again! |
|
![]() |
|
DST4ME
DS ELITE
Joined: 14 Apr 2008 Online Status: Offline Posts: 36758 |
Quote Reply
Posted: 25 Jun 2011 at 2:12pm |
|
advantage of compression for is that I prefer it because I don't like to work with clamps.
sidewindercomputers is a good placae. performance-pcs is another one, I'm not crazy about frozencpu, one time I bought four 160cfm delta fans from them, they arrived doa, and they would not take them back and send me 4 that worked, they referred me to delta and told me I needed to deal with them, that was the last time I bought there. your fittings go by size, match the size, use whatever brand you like. either brand should be fine. askk as many questions as you like
|
|
![]() |
|
sneaky George W
Groupie
Joined: 13 Jun 2011 Online Status: Offline Posts: 196 |
Quote Reply
Posted: 25 Jun 2011 at 3:27pm |
|
Does DS use 3/8 or 1/2 tubing?
|
|
![]() |
|
sneaky George W
Groupie
Joined: 13 Jun 2011 Online Status: Offline Posts: 196 |
Quote Reply
Posted: 08 Jul 2011 at 12:09pm |
|
this is a question mainly for my own curiosity. why is the loop for cpu lc
res > pump > rad > block but for gpu its res > pump > block > rad |
|
![]() |
|
DST4ME
DS ELITE
Joined: 14 Apr 2008 Online Status: Offline Posts: 36758 |
Quote Reply
Posted: 08 Jul 2011 at 1:04pm |
|
Does not really matter, as long as the liquid is going thru the rad before it goes to the block again, that all you need.
IMHO rad to block will get you the best temps, but thats just my opinion. |
|
![]() |
|
Post Reply
|
| Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |