[Hailstorm] How do you enable hot swap?Post Date: 2013-02-03 |
Post Reply
|
Author | |
Koi
Newbie Joined: 03 Feb 2013 Online Status: Offline Posts: 3 |
Quote Reply
Topic: [Hailstorm] How do you enable hot swap? Posted: 03 Feb 2013 at 1:57pm |
Last month I bought a DS Hailstorm.
Problem: I'm trying to plug in the 2.5" SSD from my old Alienware laptop using hot swap, but the system doesn't recognize that anything's happening. It's not showing up in Windows Explorer or the Intel Rapid Storage application. The BIOS doesn't seem to think it exists either. Relevant configuration: - Corsair 800D case - Asus Sabertooth Z77 motherboard - Windows 8 64bit. - SSD is a 256GB Samsung drive, about 4-5 years old Things I tried: - I had no problem screwing it on to the hot swap drive slot. - BIOS: I made sure AHCI is selected, and enabled hot swap for all 6 slots, cause I don't know which one has the hot swap bays. - I installed Intel Rapid Storage. - I updated the BIOS to the latest version (1805) - It looks like all the necessary cables are connected (I didn't do this - I think DS wires the hot swaps by default?) - I tried all 4 bays and verified with a flashlight that the connector goes into the drive. Any ideas on what I could try? Some BIOS setting I'm missing? |
|
Tidgxor
DS ELITE The Kokopelli kid Joined: 17 Sep 2010 Online Status: Offline Posts: 13000 |
Quote Reply Posted: 03 Feb 2013 at 2:19pm |
Is the drive spinning up when plugged in?
|
|
My Two Digital Storm Rigs: Mr. Bojangles (HAF-X, 2010) & Mrs. Bojingles (Bolt I, 2013).
|
|
Koi
Newbie Joined: 03 Feb 2013 Online Status: Offline Posts: 3 |
Quote Reply Posted: 03 Feb 2013 at 2:45pm |
I don't think there's any way to tell if it's powered. It's an SSD so no moving parts that can make noise, and I don't see any LEDs or other indicators on it. |
|
Tidgxor
DS ELITE The Kokopelli kid Joined: 17 Sep 2010 Online Status: Offline Posts: 13000 |
Quote Reply Posted: 03 Feb 2013 at 3:07pm |
Ah, whoops, I read SSD as HDD
Alright, looks like you checked over all the primary stuff. If you plug it into one of the standard bays (i.e. not the hotswap bay) does it get recognized then? I know that might be a bit of a pain, but it will rule out a lot of possibilities. |
|
My Two Digital Storm Rigs: Mr. Bojangles (HAF-X, 2010) & Mrs. Bojingles (Bolt I, 2013).
|
|
Koi
Newbie Joined: 03 Feb 2013 Online Status: Offline Posts: 3 |
Quote Reply Posted: 03 Feb 2013 at 3:34pm |
It did recognize it, and I noticed that it required quite a bit more force to (dis)connect the connectors, so then I tried pushing it as hard as I could into the hot swap bay and now it works! So, I guess it was just a loose connection. How boring Thanks for the help! In case anyone finds this post looking for help, this is how you screw the drive onto the tray: http://www.corsair.com/en/media/cms/manual/800D_Hot_Swap_Drive.pdf And then you push it in as hard as you can, making sure the connector goes into the drive (which is a bit tricky because an SSD drive is so light and small). |
|
Tidgxor
DS ELITE The Kokopelli kid Joined: 17 Sep 2010 Online Status: Offline Posts: 13000 |
Quote Reply Posted: 03 Feb 2013 at 5:02pm |
Simple solutions generally are the toughest ones to find
Thank you for posting that link for future reference! |
|
My Two Digital Storm Rigs: Mr. Bojangles (HAF-X, 2010) & Mrs. Bojingles (Bolt I, 2013).
|
|
DST4ME
DS ELITE Joined: 14 Apr 2008 Online Status: Offline Posts: 36758 |
Quote Reply Posted: 10 Feb 2013 at 3:25am |
Sorry I was late Koi has it right, only thing I like to point out is that sometimes the ports don't line up perfectly so pushing as hard as you can is not the best idea since it can lead to damage, instead, wiggle the swap bay a little while you push in and that should do it for you, and of course as Koi noticed, if your hdd/ssd is not recognized in the bios, then the hdd/ssd is not in place correctly.
|
|
Alex
Admin Group Digital Storm Supervisor Joined: 04 Jun 2012 Online Status: Offline Posts: 16314 |
Quote Reply Posted: 10 Feb 2013 at 11:09am |
Nice to see you here DST4ME.
|
|
DST4ME
DS ELITE Joined: 14 Apr 2008 Online Status: Offline Posts: 36758 |
Quote Reply Posted: 10 Feb 2013 at 11:19am |
Thanks Alex miss you guys/here so much, had a little free time, had to come to my favorite place and see old friends and pitch in a bit.
|
|
Alex
Admin Group Digital Storm Supervisor Joined: 04 Jun 2012 Online Status: Offline Posts: 16314 |
Quote Reply Posted: 10 Feb 2013 at 11:37am |
|
|
Post Reply |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |