FAQ FAQ  Forum Search   Register Register  Login Login

Marvell Vs. ICH10R Vs. Highpoint 640 (Single/RAID)

Post Date: 2010-11-06

 Post Reply Post Reply
Author
  Topic Search Topic Search  Topic Options Topic Options
Dragoonseal View Drop Down
DS Veteran
DS Veteran

Email address used to purchase matched with forums account email.

Joined: 03 Apr 2009
Online Status: Offline
Posts: 2247
  Quote Dragoonseal Quote  Post ReplyReply bullet Topic: Marvell Vs. ICH10R Vs. Highpoint 640 (Single/RAID)
    Posted: 06 Nov 2010 at 3:36am
Here you go, this is what I'm always talking about when I tell people to avoid Marvell's 6Gb/s and use Intel's ICH10R instead. I try to explain in detail why, and I give numbers, but yet people don't seem to believe me for some reason, so here's a nice comprehensive detailing by another for you to chew on.

A review by Lsdmeasap of the Crucial RealSDD C300 on different controllers.

http://www.xtremesystems.org/forums/showthread.php?t=261789
http://forum.crucial.com/t5/Solid-State-Drives-SSD/Marvell-Vs-ICH10R-Vs-Highpoint-640-Single-RAID/m-p/18454

Originally posted by Lsdmeasap

The Marvell 9128 does not pass along the TRIM command to the drives when using MSAHCI driver, and as mentioned previously not with the 1042 Marvell driver either.


Originally posted by Lsdmeasap

Also, forgot to mention this...

Gigabyte recently made some changes to their SATA 6Gb/s specifications in regards to the Marvell controller and SSD's.

* SATA3 RAID 0 4x performance is a maximum theoretical value. Actual performance may vary by system configuration.
* SATA3 SSDs are not recommended for use in RAID 0 mode on Marvell SE9128 ports.

http://www.giga-byte.co.uk/microsite/81/data/tech-091020-333.htm

It's about time, now the rest need to follow suit!

Originally posted by Lsdmeasap

These benchmarks took *SEVERAL* attempts, many of which froze one drive or dropped it from the controller, often times both SSD's would drop out or freeze and be unusable until a reboot. The SAME applies to a single C300, 9128 just cannot handle these drives!

Lilim
Intel Core i7 920 @4.2GHz
HAF 932 - Dual SLI Nvidia GTX 480s
3x Intel X25-M G2 (80GB) SSD RAID0
R.I.P. Sinbad the cat (November 16, 1996 - April 18, 2011)
Back to Top
justin.kerr View Drop Down
DS Veteran
DS Veteran

Email address used to purchase matched with forums account email.

Joined: 06 May 2008
Online Status: Offline
Posts: 5084
  Quote justin.kerr Quote  Post ReplyReply bullet Posted: 06 Nov 2010 at 11:44am
Thanks Dragoonseal!
I have tried several times with the marvell 6Gbs, and I never could get good results, or for that matter stable results... Only 6gbs controller that I have used that works great is my LSI 9260. Big%20Smile
Back to Top
rholyrag View Drop Down
Senior Member
Senior Member

Email address used to purchase matched with forums account email.

Joined: 17 Oct 2009
Online Status: Offline
Posts: 841
  Quote rholyrag Quote  Post ReplyReply bullet Posted: 07 Nov 2010 at 9:49pm
Thanks for the info Dragoonseal!
"What we do in life echoes in eternity" - Maximus from Gladiator
Back to Top
 Post Reply Post Reply

Forum Jump Forum Permissions View Drop Down



This page was generated in 2.929688E-02 seconds.