Overclocking a i7 920 (Beginner OC'er)

 

Frequency Control
CPU Clock Ratio ( 31X )                                                                                         
CPU Host Frequency (Mhz) ( 142 )                                                                      
MCH Strap ( Auto )
CPU Uncore Frequency (Mhz) ( 4156Mhz { 29X } )                                                
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 102 )  


Memory Feature        
Memory Speed ( Standard )
Memory Control Setting ( Enabled )
Memory Frequency ( 1866Mhz / 2:14 )                                                                
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( 2.5 )
tCL Setting ( 8 )
tRCD Setting ( 8 )
tRP Setting ( 8 )
tRAS Setting ( 24 )
tRFC Setting ( 88 )
Command Rate ( 1t )


Voltage Control
EVGA VDroop Control ( Without VDroop )
CPU VCore ( 1.40 )                                                                                                
CPU VTT Voltage ( +275 )
CPU PLL VCore ( 1.350 )
**IOH PLL VCore ( 1.350 ) 
DIMM Voltage ( 1.65 )
DIMM DQ Vref ( +0mV )
QPI PLL VCore ( 1.275 ) Raising this will help you lower your VTT
IOH VCore ( Auto ) Set to 1.2 if you are using more then 1 video card 
IOH/ICH I/O Voltage ( Auto )
**BR04 ( NF200) Voltage ( 1.40 ) (only on E-759)
**VTT PWM Frequency ( 610 KHZ )
**CPU PWM Frequency ( 1333 KHZ )
**CPU Impedance ( Less )
**QPI Signal Compensation ( Less )
ICH VCore ( Auto )
*PWM Frequency (  )


CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 6.400 GT/s )
OC Recovery ( Disabled )
Turbo Performance ( Disabled ) used with 980X only 

PnP/PCI     PCI Express
Maximum Payload Size ( 4096 )
 
Power Management Setup
ACPI Suspend Type ( S3 )   
HPET Support ( Enabled )     
HPET Mode ( 64-bit )